Reg RIFF Tool support.
venkat.raghavulu at asmaitha.com
Tue Jan 24 14:59:48 UTC 2012
Thank you for your support.
This is the command I issued:
snowball_ics_24-01.img --dev snowball_emmc --system system.tar.bz2
--userdata userdata.tar.bz2 --boot boot.tar.bz2
I got a snowball_ics_24_01.img file which was about 2GB in size. The
help says that, I can use the "--image-size", am not sure, what is the
number I can specify for best size. Not specifying it got a size of 2GB.
Well size is not my big problem.
The issue is that: the created .img file when flashed did not boot, I
did not see any traces coming out.
I guess probably the .ssw files are not present in the .img file(and
hence were not flashed), am not sure. These .ssw files are accessed by
the do_image.py. How to resolve this issue.
On Tue, 2012-01-24 at 10:04 +0100, Benn Pörscke wrote:
> The right way to go is to use the .bz2 files that the build produce
> and with Linaro Android Media Create tool use the switch "--dev
> This will then create a image that can be flashed with riff.
> On 01/24/2012 09:42 AM, Venkat Raghavulu wrote:
> > Hello All,
> > I am using Linaro ICS release. On building Linaro ICS the make
> > creates, "boot.tar.bz2, system.tar.bz2 and userdata.tar.bz2" files.
> > These files are then to be used with "linaro media create" tool to
> > be copied in to "SDMMC CARD".
> > The "linaro media create" tool does not support "flashing of eMMC"
> > device.
> > I want to use the RIFF tool to flash the eMMC with ICS.
> > I have taken note of :
> > a. The list of the components that are to be included for the RIFF
> > tool like "issw_snowball_a02_secure.ssw" & other .ssw files
> > b. Modifying the do_image.py script to take care the paths where the
> > built files will be availiable.
> > I need some support to:
> > a. Support to modify the build scripts so that it creates, *.img
> > files rather than .bz2 files.
> > Thanks and Regards,
> > Venkat.
> Benn Pörscke
> Delta 4
> Scheelevägen 19 B
> 223 63 Lund
> Office: +46 46 10 42 58
> Mobile: +46 703 68 13 30
> Email: benn.porscke at stericsson.com
> This communication is confidential and intended solely for the
> addressee(s). Any unauthorized review, use, disclosure or distribution
> is prohibited. If you believe this message has been sent to you in
> error, please notify the sender by replying to this transmission and
> delete the message without disclosing it. Thank you. E-mail including
> attachments is susceptible to data corruption, interception,
> unauthorized amendment, tampering and viruses, and we only send and
> receive emails on the basis that we are not liable for any such
> corruption, interception, amendment, tampering or viruses or any
> consequences thereof.
> kernel mailing list
> kernel at igloocommunity.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the kernel